Good news! The NF team officially joined our company, and the high-quality product series is all supervised by NF.
Description:
The use of aerospace materials is an idea developed by the NF team in 2016. The location of the throat requires poor thermal conductivity and non-stick properties for printing materials. We have tried many experiments and finally completed it in 2020-08-15. We named this product series Zone, and hope that 3D printing enthusiasts will try new products in new Zone and create unlimited possibilities.
After improvement and testing by the NF team, we launched the V2 version. This length will be 3mm longer than the normal V6 Heatbreak, but the leakage and rotation problems have been solved, allowing customers to better experience the charm of aerospace materials, and we have further found use The method of aerospace materials, thank you for your support and encouragement.2021-10-08 official sales
Because the material is less sticky than metal, it reduces the blockage caused by the friction of the throat
Combination of copper metal and aerospace materials to make a heat break is better than the original thermal barrier performance and improve print quality. The printing effect exceeds the bimetal heat break, making it easier to print PLA, ABS, PETG, PA, FLEX, etc.
Size:heat end screw M7, heating end M6, total length 24.7mm;
Use for: 1.75mm
Material:Copper & aerospace materials
Package:
1 * V6 Zone Heat Break
Heat Break TEST:
There may be different product shapes, but the same product materials have the same heat dissipation and insulation effect.
Hotend Temperature：212.3℃
Duration：10min
Ambient Temperature:28.5℃
Temperature test:K-Type
Fan :Cheap 3010 fan
Assembling:V6 hotend
Heat preservation of heating block:Thermal insulation cotton
Heating tube:12V 40W
